Downloads

Home of the RIZE Open Computer Project

RIZE is an open hardware, open source computer for teaching computer fundamentals. The project's goal is to create a very low cost platform with a classic architecture. The minimal-abstraction approach enables the user to understand the direct relationship between programming and hardware.

RIZE Forum

RMS100 Downloads

USB Driver

IMPORTANT : If your board has the USB option, click here to download the Silicon Labs CP2101/CP2102 Serial to USB driver. This should be done before connecting the USB cable. Once installed the RMS100 will connect to your PC as a serial com port. Read the readme.txt file in the ZIP file for full installation instructions, or visit www.silabs.com for more information on the driver.

Download USB Driver (zip file 1.3MB)

Bootloader

RMS100 comes with factory installed bootloader. To replace or upgrade the bootloader, download SpeedLoader binary and use Rowley CrossStudio to program Flash memory. Or follow these instructions. Upgrading SpeedLoader requires DBG-3FT cable or external Wiggler-compatible debug interface. See this note about using DBG-3FT cable with OCD Commander

Speedloader Version 1.3 KickLoader (Use for first stage of upgrade)

Documentation

Quick Start Guide

Technical Manual

Circuit Schematics Rev B Rev C

Component Placement

Development Tools

CrossWorks V1.2 ARM IDE Contact Rowley Associates for 30-day evaluation license

Pre-Built GCC Toolset for ARM

VIDE GPL'd IDE for GCC

Code Samples

LED Demo Complete Vide Project Executable only (program into RMS100 using Speedloader and a terminal emulator such as Hyperterminal)